Getting Started

Introduction Purchasing a License Registering a Vehicle

Antilag

Introduction RPM Cut Auto Launch Trigger Enrichment Retard Activation Cooldown Max Activation Time

Launch Control

Introduction Adjustability Ignition Retard Ignition Advance Ignition Cut

Guardian

Introduction Limp Mode Knock Knock Average Overboost Short Term Fuel Trim

Overboost

The overboost Guardian monitor is used to monitor the boost pressure of the engine. This is useful for protecting the engine from excessive boost pressure that could cause damage.

Configuration

`Enabled`

Whether or not the overboost Guardian monitor is enabled.

`Trigger`

The trigger value for the overboost Guardian monitor. This is the threshold at which the monitor will trigger. The value represents the maximum allowed boost pressure in hPa.

`Limp`

Whether or not the vehicle will enter limp mode when the overboost Guardian monitor triggers.

`Min Relative Load`

The minimum relative load that the engine must be under for the overboost Guardian monitor to trigger.

`Min Time`

The minimum time in milliseconds that the boost pressure must be above the trigger value to actually trigger the Guardian monitor. This is to prevent false triggering due to momentary spikes in boost pressure. If set to 0 it will trigger immediately.

Improve this page