Getting Started

Introduction Purchasing a License Registering a Vehicle

Antilag

Introduction RPM Cut Auto Launch Trigger Enrichment Retard Activation Cooldown Max Activation Time

Launch Control

Introduction Adjustability Ignition Retard Ignition Advance Ignition Cut

Guardian

Introduction Limp Mode Knock Knock Average Overboost Short Term Fuel Trim

LPFP Pressure

The LPFP pressure Guardian monitor is used to monitor the low pressure fuel pump pressure. This is useful for monitoring the health of the LPFP and detecting any issues with the fuel system.

Configuration

`Enabled`

Whether or not the LPFP pressure Guardian monitor is enabled.

`Trigger`

The trigger value for the LPFP pressure Guardian monitor. This is the threshold at which the monitor will trigger. The value represents the minimum required pressure in kPa.

`Limp`

Whether or not the vehicle will enter limp mode when the LPFP pressure Guardian monitor triggers.

`Min Relative Load`

The minimum relative load that the engine must be under for the LPFP pressure Guardian monitor to trigger.

`Min Time`

The minimum time in milliseconds that the LPFP pressure must be below the trigger value to actually trigger the Guardian monitor. This is to prevent false triggering due to momentary drops in pressure. If set to 0 it will trigger immediately.

Improve this page