Getting Started

Introduction Purchasing a License Registering a Vehicle

Antilag

Introduction RPM Cut Auto Launch Trigger Enrichment Retard Activation Cooldown Max Activation Time

Launch Control

Introduction Adjustability Ignition Retard Ignition Advance Ignition Cut

Guardian

Introduction Limp Mode Knock Knock Average Overboost Short Term Fuel Trim

Knock Average

The knock average Guardian monitor is used to monitor the average knock retard in the ECU. This is useful for monitoring the engine health and detecting any issues with the engine, fueling, ignition timing, etc.

Configuration

`Enabled`

Whether or not the knock average Guardian monitor is enabled.

`Trigger`

The trigger value for the knock average Guardian monitor. This is the threshold at which the monitor will trigger.

`Limp`

Whether or not the vehicle will enter limp mode when the knock average Guardian monitor triggers.

`Min Relative Load`

The minimum relative load that the engine must be under for the knock average Guardian monitor to trigger.

`Min Time`

The minimum time in milliseconds that the knock average must be above the trigger value to actually trigger the Guardian monitor. This is to prevent false triggering due to momentary spikes in the knock average. If set to 0 it will trigger immediately.

Improve this page