Getting Started

Introduction Purchasing a License Registering a Vehicle

Antilag

Introduction RPM Cut Auto Launch Trigger Enrichment Retard Activation Cooldown Max Activation Time

Launch Control

Introduction Adjustability Ignition Retard Ignition Advance Ignition Cut

Guardian

Introduction Limp Mode Knock Knock Average Overboost Short Term Fuel Trim

HPFP Deviation

The HPFP deviation Guardian monitor is used to monitor the deviation between the requested and actual high pressure fuel pump pressure. This is useful for monitoring the health of the HPFP and detecting any issues with the fuel system.

Configuration

`Enabled`

Whether or not the HPFP deviation Guardian monitor is enabled.

`Trigger`

The trigger value for the HPFP deviation Guardian monitor. This is the threshold at which the monitor will trigger. The value represents the maximum allowed deviation between requested and actual pressure in bar.

`Limp`

Whether or not the vehicle will enter limp mode when the HPFP deviation Guardian monitor triggers.

`Min Relative Load`

The minimum relative load that the engine must be under for the HPFP deviation Guardian monitor to trigger.

`Min Time`

The minimum time in milliseconds that the HPFP deviation must be above the trigger value to actually trigger the Guardian monitor. This is to prevent false triggering due to momentary spikes in pressure deviation. If set to 0 it will trigger immediately.

Improve this page