Getting Started

Introduction Purchasing a License Registering a Vehicle

Antilag

Introduction RPM Cut Auto Launch Trigger Enrichment Retard Activation Cooldown Max Activation Time

Launch Control

Introduction Adjustability Ignition Retard Ignition Advance Ignition Cut

Guardian

Introduction Limp Mode Knock Knock Average Overboost Short Term Fuel Trim

Trigger

In the trigger section you can setup the conditions under which the antilag system will activate.

Configuration

`Enabled Maps`

The map switches that will allow antilag to be activated.

`Min RPM`

The minimum RPM at which antilag will activate.

`Min Pedal`

The minimum pedal position at which antilag will activate.

`Stalk`

The cruise stalk positions at which antilag will activate. By default this is UP and DOWN, and AUTO_LAUNCH is set to UP. This means you can pull the cruise control upwards for auto launch and downwards for normal manual release antilag. Valid cruise stalk positions can be found here.

Notes

The antilag system is clever, you do not have to be in say MIN_PEDAL range to pull the stalk. Instead what you can do is to pull the stalk, and then floor the pedal and the antilag will activate at that point in time.

Improve this page