Getting Started

Introduction Purchasing a License Registering a Vehicle

Antilag

Introduction RPM Cut Auto Launch Trigger Enrichment Retard Activation Cooldown Max Activation Time

Launch Control

Introduction Adjustability Ignition Retard Ignition Advance Ignition Cut

Guardian

Introduction Limp Mode Knock Knock Average Overboost Short Term Fuel Trim

Timing

Internally, almost everything runs at a 10ms resolution. This applies to things like Antilag activation, Auto launch, Launch control timing release etc. However, most user settings are applied with a 100ms resolution, this is to reduce the internal storage required in the ECU for time keeping. As an example, a Guardian Monitor Min Time of 100ms will act the same as 140ms.

There are some exceptions to this, for example the ignition cut time for flames is set in 10ms increments.

If you have higher accuracy timing requirements, please reach out to us. It’s fairly simple to add higher resolution timing, but I don’t believe it’s needed as of currently. But if anyone needs it, we can make the accuracy configurable.

Improve this page

Getting Started

Antilag

Launch Control

Flames

Guardian

DTC Off

Misc

Advanced

Timing